NAME
- getauthinfo - obtain a certificate for authentication
SYNOPSIS
-
getauthinfo keyname
wm/getauthinfo
DESCRIPTION
-
Getauthinfo
makes contact with
logind(8)
on a `signer', or certifying authority, with which the user
has previously been registered using
changelogin(8),
to obtain a certificate that
can later be presented to other Inferno services to authenticate the user.
If
keyname
starts with a `/', the certificate is stored there; otherwise, it is stored in the file
/usr/user/keyring/keyname,
where
user
is the name in
/dev/user
(see
cons(3)).
The directory
/usr/user/keyring
must exist.
The user is prompted for the following:
- signer
- The name of the signing server, for example
signer.froop.com.
The default is the default signer for the site:
the value of
SIGNER
in the local network configuration database
(see
ndb(6)).
- remote user name
- The name of the user for whom a certificate is to be obtained. The default is the current user name in
/dev/user.
- password
- The user's password. The password entered on the client must match the password
previously stored on the server using
changelogin(8),
or a certificate will be refused.
- save in file?
- The default is `no'. If the user responds `yes', the certificate is written directly to the file. Otherwise, getauthinfo becomes a file server, serving a secure temporary file bound over the file name above (because that is where applications look for it). The temporary will disappear if the name is unmounted, or Inferno is rebooted.
Note that the certificate will expire at or before expiry of the password entry on the signer.
The signer needs its own key to endorse the certificates that it gives to clients. If a user requests a certificate with getauthinfo(8) before the signer's key is created on the signer (eg, using createsignerkey(8)), then the request will be rejected with a suitable diagnostic by logind(8).
- File servers
-
Machines that will be file servers must obtain a certificate and save the certificate in a key file named
default,
thus:
- getauthinfo default
The user invoking getauthinfo must be the same user who later runs svc(8) to start the machine's services.
- File server clients
-
Machines that wish to be authenticated clients of file servers must obtain a certificate and store the certificate in a file named
net!machine.
The file name must match exactly the
server address given to
mount
(see
bind(1)).
To set the key, use
- getauthinfo net!host
- Window system interface
- Getauthinfo has a visual counterpart wm/getauthinfo for use under wm(1). It takes no arguments. It displays a window prompting for all the information it needs, and offering apparently sensible defaults. Apart from the different interface, its function is otherwise the same as the command line version.
FILES
-
- /usr/user/keyring/net!machine
- where a certificate is stored on a client machine
- /usr/user/keyring/default
- where a certificate is stored on a file server
- /lib/ndb/local
- contains the default host name of the signer
SOURCE
-
/appl/cmd/getauthinfo.b
/appl/wm/getauthinfo.b SEE ALSO
- bind(1), changelogin(8), createsignerkey(8)
| GETAUTHINFO(8) | Rev: Tue Jan 29 13:11:52 GMT 2008 |