man(1) Manual page archive


     FPGALOAD(8)                                           FPGALOAD(8)

     NAME
          fpgaload - configure FPGA

     SYNOPSIS
          auxi/fpgaload [ -c clk ] file.rbf

     DESCRIPTION
          Fpgaload configures the directly-attached Altera Flex6000
          FPGA on the Bright Star Engineering ip-Engine.  It enables
          the FPGA and output of the external system clocks, then
          loads the FPGA with the contents of file.rbf which should be
          in the `raw binary format' produced for example by the
          Altera tools.  After successful configuration, the BCLK is
          set to clk MHz; clk must be a divisor of the ip-Engine's
          system clock (currently 48 MHz).

     SOURCE
          /appl/cmd/auxi/fpgaload.b

     SEE ALSO
          fpga(3)